The wiring mode of the nuke switch is :

Toggle Switch is a kind of switch widely used in electronic circuits, and its operation mode is to control the on-off of the circuit by flipping the switch handle. In the inside of the subswitch, the circuit is controlled by switching the state of the switch contact.

Under normal circumstances, the switch has three terminals a: one is a common terminal (COM), the other two are switching terminals (T1, T2), and the wiring method is as follows:

1. For single-pole single-throw switches, generally only need to connect the common terminal and switching terminal.

2, for single-pole double-throw switches, two switching terminals need to be connected to two different circuits.

3. For the bipolar single throwa switch, it is necessary to connect one polar power supply to one switching terminal, and the other polar power supply to the other switching terminal, so as to control the on-off of the two circuits at the same time.

4, for the double-pole double-throw switch, the positive and negative poles of each circuit need to be connected to different switching terminals, so as to achieve simultaneous control of the two circuits on and off.

The wiring mode of the subswitch may vary according to the specific model, so pay attention to the wiring mode of different models when wiring. In practical applications, it is also necessary to select the appropriate type and wiring mode of the subswitch according to the specific circuit requirements.